Brake pads Centric or OEM Mazda

I got them installed and the hardest part was the dam clips they are so hard to compress to slide them in. I had to juggle them sideways. Anyone had this problem? I needed a second hand. They feel great! They are so much thicker than stock. I fallowed this guy's video: Yes I had to compress the Pistons.

The Centric PosiQuiet ceramics are WAY better than the OEM pads, no nasty hard-to-modulate initial bite. Rather the Centric's are quite linear in their force-to-braking ratio. I just upgraded my '18 GTI to a '19 R and have a set on order.

I went with the Centric PosiQuiet Ceramic's too and am very happy with them Akebono does not have an application for my 2018 GTI SE but the PosiQuiet's feel the same to me as the Akebono's I had on my last two Audis.

Continuing to drive on them this way will not make the pad deposits go away. Trust me. I have the same ceramic pads on our 3 vehicles (golf r included). Centric posi quiets. They are great pads with great cold bite and minimal dust. But if you overheat them and stay on the brake pedal at a stop, like any other pad, it will embed pad material onto the rotor.

Centric Posi Quiet Ceramic is what I use. No dust and quiet too.

Back in March I got fed up with the B5 platform shenanigans and started shopping for a Subaru... Upon entering the Mazda dealer, I got the typical \"We don't have the exact one you want in manual, but we do have this...\" and I decided to humor the salesman. Lo and behold, a 2012 Mazdaspeed 3 appeared before me... With 263 ponies and 280 ft/pounds of I could dead, the MS3 has proven itself to be the best possible car that a 23 year old male could own.

On a positive note- the brakes were sporty car firm and easy to modulate even with these tires.

I have just put posi-quiets on my PP GTI and I'm experiencing vibration while driving at highway speed (68-80 mph, worst at 75ish). Re-checked torques and the faces of hubs/wheels were clean. Will go in for a balance but is it possible I got a **** rotor or something? Possible I have a bent hub and didn't realize it until the rotors were swapped?

The bigger brakes are strong, but the gearbox is obstructive. Steering response is instant and - to your eyes anyway - the MPS corners flat and hard. But wide, high, soft part-bucket seats send the opposite message to your brain , giving the uncomfortable impression the car is rolling in corners.

In my experience the OEM Mazda Miata "Value" brake pads have absolutely horrible initial bite characteristics and require much more pedal pressure to achieve a given level of deceleration than aftermarket performance oriented brake pads.