Consider Project Mu Club Racers. They’re not the most aggressive pads but hold up decently well on track depending on your pace and are surprisingly streetable.
I had the same problem with my c8 z51, I switched to the Carbotech 1521 pads and they solved the problem. Would definitely recommend
I had an issue with severe brake dust from the OEM pads on my Z06 Corvette. I replaced the pads with Carbotech 1521s and the dust was eliminated. Made a huge difference with keeping the wheels clean and the pads preformed better.
Pretty happy with my PMU 999s. They’re a step down from csgs but so much cheaper even with tariffs on imports.
IMO the best are Project MU-HC+. in my Megane RS I could treat the HC+ as a track pad and go all-out for a full session, they'd just wear pretty fast at high temps
The pads seem to last forever on the street, and work really well on the track/ when warm
Carbotech has served me very well on my M6
I run carbotech 12/10 on my C5. Streetable but messy. I only really drive to track, on track, then home. Probably drive 100 street/leisure miles a year, but after 2 track days on this setup (wilwood aero6 in front) I’m very happy with the setup.
im running XP10s... so far this set up is amazing, the braking is strong initial bite with little fade. Just take in consideration that this Carbotech pads are modular which means you will have a slight longer pedal travel than normal. And yes they are super noisy, when i drive it on the street i try to be careful with my braking and not feather the brakes, that will make then literally screech and grind the rotors, instead i try to brake a bit harder than usual to get a good bite and then let go of the brake once i stoped (put the car in neutral most of the time or creep forward little by little to releave some heat).
I used Carbotech brake pads, but they dust and squeal like crazy, so other options may be better.
Write your review
Help others - share your experience with this part.
