Brake pads Carbotech or Project Mu

I personally use Carbotech XP10 for track and Stoptech Sport pads for street on the same rotors

I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.

I had Carbotech XP12 before and they're were great, but squealed like a pig on the street. I haven't tracked the Dynamic Friction but aggressive street even on V730 & daily driving, they've been great.

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

I use Carbotech xp10 in the front, xp8 in the rears. Love them. Semi heavy car but they feel great the entire weekend. They are very loud on street though

I went from EBC to Carbotech. It’s a night and day difference. I’m running XP8, but my car is very light.

I've been to 20 track events to this day I'm still running OEM calipers. Just carbotech pads. You don't need a big brake kit at all. The oem cracks because of improper cooldown. I learned that after a session to take my cooldown lap seriously and ever since then i stopped cracking AutoZone rotors

I ran stock rotors for a long time with carbotech xp10/8, front brake ducts, stainless lines, and Motul 660. The XP10/8 + ducts was sufficient for 20min session the tracks I drive.

I'm using carbotech xp8 on my 3800 pound sedan. They've survived 6 days at the track plus occasional driving around town for a year.

I found Project Mu Club Racers to be decently streetable for a track pad. They do squeal a bit at less than 25 but are tolerable as long as they’re bedded in and you’re giving a decent amount of threshold pressure.