Brake pads Brembo or Duralast

Autozone's Duralast Gold pads and rotors will run you about $300 for the set. They work very nicely. If you're even moderately handy or have a friend with the tools, it's less than 2 hours of work. If you have a decent setup with a lift, it's more like 45 minutes of work. $600 for labor is HIGH AF. This truck is the easiest brake job I've ever done.

Some pads make more noise than others, I'm not going to use Brembo pads on my car again, they aren't making bad noises, just regular brake sounds at a slightly higher volume than my previous Napa brand ceramic pads.

Today i had replace my rotors cause are very warped both, and get installed the textar front discs with brembo ceramic pads... \ud83d\udc4d\ud83c\udffc Im tired of cleaning the front rims every 2 days.

The OEM Brembo pads aren't bad at all. Mine squeak here and there, but rarely. No stopping power issues. They dust a lot.

owning a vehicle with Brembo's on it: they are really excellent brakes.

Brembo brakes generally have no problems.

Brakes are Brembo's from a Evo 9, i used a adapter kit for Eclipse's and bolted right up but is slightly clocked down (Which i kind of like).

New brakes Brembo Max in front and Brembo in back

I'd avoid the cheaper duralast stuff but the gold is usually OK.

Those Brembo pads that cost $500 a set are total trash, too. They are low friction and still real dusty. I threw mine in the trash at like 2000 miles.