Brake pads Bosch or STOPTECH

I went with Raybestos rotors and Bosch QuietCast pads. Equal if not better than OEM and much much cheaper.

The StopTechs Sports are the better track and street option, I used the front pads in my E46 M3 for 10k+ street miles and a few trackdays. They have good feel and modulation. Just had a little bit of fade towards the end of a 25 minute session.

So I followed their direction and jumped on the old interwebs to my retailer of choice, RockAuto, and ordered Bosch pads and rotors front and back. So I had nothing planned for the weekend figured I would do a little wrenching. Take the wheels off and start to unbolt the caliper, looked down and my rear pads still show about half life. Maybe they just meant the fronts, pop the wheel and they are showing even less wear. My question is it normal for the CX-5 to go 80000 miles on the original pads? I didn't think I drove like my grandmother but it is 70% highway/non city driving. For anyone that does your own maintenance the cost for 4 rotors and pads was less than $200 (Raybestos Element 3 rotors and Bosch Quiet Cast ceramic pads). It really a fairly easy job, and would not take more than 30 minutes per wheel.

Bosch quiet cast

I’ve had stock set up, powerstop rotors with Hawk LTS Truck/SUV pads, and my current set up is Bosch severe duty pads with Advics premium rotors. So far the current set up is my favorite. I really prefer the immediate “bite” of semi metallic pads.

I’ve been happy with my StopTech Sport pads.

In comparison to the stock setup, the Bosch QuietCast pads and rotors aren't as touchy or responsive. They do require a little bit more pedal travel for normal stopping power. However, they do offer more precise control over how much power is applied throughout the pedal stroke. They are also incredibly quiet and smooth.

I've had a bunch of stoptech sports on backroads and they have been good to go every single pair. Dust like crazy but they have good stopping power and hold on to their bite even when they start getting hot. You won't be setting any world records with them but for double duty they have served well.

I went for Bosch models. Fronts have faired much better than oem. Rears I had some other issues (didn’t use service mode) that destroyed them prematurely

Stop tech pads have a lot of brake dust. I had them and hated them. I went with the power stop pads low dust on all four and powerstop drill and slotted rotors up front. I already had stop tech slotted in the rear.