Brake pads Bosch or OEM Chevrolet

After a year I replaced the brakes and rotors, and the mechanics specifically said to stick with major brands like Bosch because they are standard, easy to work on, and easy to order parts for.

Was told to replace all my discs and brake pads too a few weeks back when I did my MOT. Tight on money atm so decided to do it myself and I’m glad that I did because I saved myself a lot of money, only paid for parts and then a few hours of my time. Ordered the whole set from AutoDoc and the total was £220 for Bosch parts, so not exactly budget either. Also, garages with cheapest quotes might opt to use budget parts which could end up squeaking etc, so just keep that in mind, but I’d say do it yourself if you wanna save the most money.

Bosch quiet cast brake pads and rotors are a phenomenal aftermarket option.

The problem is the OEM pads. I replaced my pads and only the pads with BOSCH pads, and it brakes fantastic now.

If you are looking for the best brake pads and rotors that will not pulsate, last a long time and work across a vast of vehicles, I suggest you look into Perfect Stop.

I've got AutoZone's gold ceramic pads on mine right now. They are made by Bosch, I know because they drop-shipped from the Bosch factory. Grippier than OEM, quiet for daily driving and decent for spirited driving.

Just bought a set of Bosch F & R brake pads w hardware for $66 (including tax) on Amazon. For my 2007 Infiniti M35. Fit perfect. Good quality.

Fourth I would make sure you are using high quality pads and rotors. Use name brands like raybestos, centric, Bosch, etc. Lower quality brands will have more issues.

I installed new front brake pads (Bosch quietcast 621) and they squeal when I'm driving with them. It doesn't seem to be generating a crazy amount of heat or wear but it's really annoying. So it turned out it was the clips that came with the pads. When I installed the new pads I didn't pull out the tab on the bottom clips. Driving with the new clips damaged them so they were no longer usable. I took the pads off and put the old clips on properly and the sound was gone.

For my (owned 3 years, purchased used) 2014 Honda Crosstour I've always had to grind down the edges of the pad mounting plate tabs on Bosch brakes a couple of mm to get it to fit into the calipers. I have just received a new set, and while I still had to grind down the edges to get them to slide into the calipers, the top and bottom edges were MUCH shorter than the previous pads. So much so that when braking after reversing direction, the pads will shift in the calipers with a noticeable 'click' as the brake pads engage the disks to slow the car and are thus moved to the other end of the caliper. The overlap between the brake pad plate and the 'C' in the caliper where the tab meets the caliper is only 2mm or so. Definitely less than I am comfortable with.