For \~$250, the Ferodo DS2500's are a great pad for dual street/spirited and light/medium track use.With any semi-metallic pad, you're going to have dust. You can't really substantially reduce dusting without going to something like ceramic pads, which then frictional force is compromised.
The heat resistance is much better than the stock pads, so it'd take a lot more to make these pads fade. They are more durable as well at least according to my experience. The only issues are that when it's cold the pads do get a little noisy and there's the increased brake dust, but I think these are non major issues and worthy of the trade off for much better and reliable braking performance.
I used my stock tires 15k mi + 6 track days + 2 driver skill courses - brake fluid (Motul RBF600) - brake pads (I used Ferodo DS2500 on the fronts)
I've used the cheapo Wearever rotors/pads from autoparts stores, and the Bosch Quietcast. Hands-down, as long as I can afford it, I will be using QuietCast if it's available.
I use Bosch ceramics on mine and they're amazing.
Cut to 2019 and I added Ferodo Racing 2500 pads to the front and they worked GREAT at NJMSP, still with the EBC rears.
I went with Bosch QuietCast rotors and pads . The Akebono pads performed well, but wore out faster than I'd expected. I don't know if the low wear on them caused scoring of the rotors or if it was the calipers not doing a proper job... but I did not detect a loss in brake performance, which was really strange. This was happening to the rear, so maybe the front end brake system was compensating.
Also my rear brakes say Bosch on the center of the pad so mine could be different from yours if yours aren’t showing the brand.
Ferodo DS2500 (street/track)-$290.00
I think my DS2500s were a good bit dustier than stock
Write your review
Help others - share your experience with this part.
