Brake pads Bendix or OEM Mazda

My 12 of this generation is at 222k miles with just oil changes and tires as well. One set of pads and rotors at 175k and still had life left.

I’ve been using Bendix metal king for my car, it outperforms stock pads from Toyota by a lot. For context, I’m from Sabah; under normal driving conditions and without another driver in front basically keeping their foot on the brake pedal. Our steepest mountainous road is Kimanis, gradients ranging from 10% to 25%; it handled the descend perfectly without fading as compared to stock pads. Traversing to-and-fro Kundasang was also a breeze, brakes would typically fade half-way down the mountain with minor traffic ahead. I’m looking to switch to Bendix Ultimate come time to change my brake pads. Though I have to agree with the brake dust, but if you wash your car once a week then it shouldn’t be that awful.

I inherited a 2011 cx7 from my parents who purchased this car new. They have always kept care of their vehicles. This is a non turbo model. Other than normal maintenance items they had replaced the AC compressor. Since I took it over in 2020, I replaced drive side front wheel bearing and passenger front caliper, brake pads all the way around plus normal maintenance items. 320,000km runs perfectly.

Some DBA T2 slotted rotors and Bendix heavy duty or any other quality brand pad will be good.

Repco, whatever model serial for rotors and Bendix pads, then find someone to do it for you.

Had the same scenario with my cx30 after changing the brakes, only the car messages were things such as engine malfunction and dynamic control malfunction which is ridiculous. Clearing the fault using a Bluetooth obd and the torque app was enough for me, thanks for the post.

Changed the pads front and rear was super easy and straight forward.Then after taking the car out of 'electric brake service mode' and starting the car I get the a yellow check engine light and code C05AB, clearing it made no difference. Only thing I could find online was "The electronically controlled brake unit detects that the pressure feed valve (primary side) is stuck ON (OPEN)."

brake screech that's omni present

I put OEM Brakes on my ‘19 3 GT AWD. I’m 20K KM into them, and they pulse like mad when I brake above 90KM/h. Absolute fucking trash. The factory brakes also did this, above 90KM, but started around 50K into their life.

I bought Bendix DB2315 EURO+ for my Mercedes B180 year 2012 Petrol.

Tried to change the front brake pads and they don't fit.