Brake pads ATE or Bosch

Regular carbon ceramic brake pads, from Ate and I presume also Brembo, are better than normal pads. Same stopping power but much less heat generation and brake dust.

Bosch quiet cast

I’ve had stock set up, powerstop rotors with Hawk LTS Truck/SUV pads, and my current set up is Bosch severe duty pads with Advics premium rotors. So far the current set up is my favorite. I really prefer the immediate “bite” of semi metallic pads.

In comparison to the stock setup, the Bosch QuietCast pads and rotors aren't as touchy or responsive. They do require a little bit more pedal travel for normal stopping power. However, they do offer more precise control over how much power is applied throughout the pedal stroke. They are also incredibly quiet and smooth.

I put ATE200 + Ferodo DS2500 pads on my Mk7 in prep for its one (half) trackday, have been on for a few thousand street miles and work well at all temps.

I'm really liking the ATE pads I got for my 340i with the brembo F/Rs.

I've been doing my own brake job for a while and have used Bosch QuietCast rotors and Bosch QuietCast Premium Disc brake pads, both purchased from Amazon. No complaints.

Just replaced all four brake pads and rotors on my 2018 MZ3 hatch with 46,000 miles. Used Bosch quiet cast brake pads and rotors. Paid around $350 for parts and took me around three hours.

Even the parts prices are on a different level, ie brake pads with a Volvo logo on them - 160€, with ATE (they allegedly produce the original pads too) logo - 60€...

I just replaced the pads (Bosch BE1633H) and rotors (Textar 5Q0615301G) on my MK7 R, and after torqueing everything I noticed a clunk when rolling up and down my driveway (happened only when going from forward to reverse or vice versa). I jacked the car up, took the wheels off, and checked all the bolts, everything was tight and torqued to spec. I then noticed that the brake pad itself is shifting.