Brake pads Akebono or OEM BMW

Akebono pads are great.

That's a great price. Akebono is one of the OE suppliers to Honda and it looks like they either forgot to add the price of the pads or just left them out on purpose which would normally add at least an extra $50. $100 or a little over is normal price per rotor so that checks out and 1.25 hours is very cheap. Most shops would be closer to 2 hours to swap all that out.

Akebono are the best brakes a japanese car could get. I replaced my Civic brakes and rotors myself. Cost was around 200$ in parts from RockAuto. If it’s just one axle, I would consider ordering the parts yourself and doing to job on all tires for less. Plenty of YT videos out there. You could buy or borrow parts and do it for less. *I’m a 45 yo woman for reference.

Good prices and looks like quality pads. Akebono is good.

The rears are ACT828A.

I live in Socal and bought mine from a dealer out of state. Get on bimmerpost and search, there are a few like Jeff Steele from Passport BMW or a finance manager at Camarillo. If you are hard on the brakes like I am looking at Ultimate care+ is worth it. I’ve used its twice already to replace pads and rotors

I recommend using Akebono ceramic instead of OEM semi-metallic because they’re more gentle on the rotors and significantly less dusty.

Factory brake pads really are better but that's like the one part they seem to gouge the price on the worst, I usually try to get the closest thing to factory the aftermarket offers, you can usually get Akebono which might actually be the same as factory for quite a bit less on like Tire Rack or sometimes the local parts place will have them.

Had the same shit on my 2016 Legacy - brake pads and rotors every 20-25k. The stealership blamed ME for it, claiming I must "ride my brakes a lot." The first one happened ~22k miles from brand new, and the warranty covered it. They told me the replacement at 45k would be on me for nearly $1500. I had my local shop put in third-party rotors and OEM Akebonos (the same brand Subaru uses) at that 45k (around five years ago) and just had them changed ~97k. The shop that put them in were amazed I'd ridden on five year old pads and rotors. The third-party rotors were still serviceable, and not having to worry about either until ~150k was worth a little more to me. So no, you're not the only one who is suspicious that Subaru's OEM rotors suck.

I wouldn\u2019t get them again. Occasionally noisy at low speed, very unsettling brake feel in heavy rain/water, debris can get trapped between the caliber and wheel creating an ungodly noise. That being said, I have 82k miles on mine and still original pads.