Brake discs Centric or GALFER

get Centric 120 series rotors. Way more braking than stock and zero noise.

Personally I use galfer

Switched to Galfers last year on 2 bikes: rival and force. Out of my opinion, very well machined discs doing their job. I’m satisfied..

I use Centric rotors/drums and Akebono shoes/pads from RockAuto. They work fine, despite FUD on OEM for shoes.

I'd also recommend centric for the rotors.

My solution is to always use top of the line brake pads like PFC 11s or raybestos st43 and up.

The other thing I ended up doing is once I really started being able to push the car hard, I installed Porsche 911 993 air deflectors on the lower control arms and that increased airflow was just enough to let me get away with keeping the small brakes. This past weekend I was at VIR and I was getting up to 130 on the straights, even bumping up against the rev limiter in fifth before braking for roller coaster, and the brakes held up fine. That and $30 RockAuto centric rotors.

Rock auto it legit. The power stop bundle is nice. For my accord, I usually go with centric rotors and akebono brake pads.

Just got oem centric with ceramic pads for my 14 GS350.

I had the Centric rotors for both the front and rears. I'm replacing the rears Cemtrics next week which have 48k km on them with Raybestos Element 3s because they are highly recommended here and I wanted to try something different. I have a feeling my rear centric rotors have been ruined by the akebono pads which I think have gone down to the metal and are creating a groove in the rotor. Sad that this is all happening at only 48k km.

It looks like you got the C-tek ones, which don't have any protective coating on the non-wear surfaces, which is why you see the rust.