Owner reviews for cooling fans

I just replaced both of my fans a month ago on my 2008 ex. I went with TYC fans from Rockauto. The job was pretty easy. I did everything from above. The hardest part was getting the wires unclipped off the bottom of the passenger side fan. I removed my battery and tray as well as metal bar in front. There is one bolt at the bottom (most are at the top) to remove that metal bar/beam/crossmember thing but if you remove the battery and tray it’s easy to get at from the top.

Ended up being both fans went out, the relay was bad, and the condenser needed replacing (no refrigerant left). I bought the car with no a/c so diagnosed as I went along. If your windows work, I would have waited for rock auto or Amazon, because no way am I paying for inferior parts from AutoZone. I buy Denso/Nissens/TYC (in a pinch) only for my cars, don't want to deal with failure rates of non OEM.

Mine did that I bought the original fans for it mounted them problems solved

Sou dono de uma, dependendo do uso que vai dá pra ela, é uma moto super tranquila de se ter, a minha tá chegando nos 48 mil km rodados, apresentou um problema de compressão, no qual não conseguia segurar a marcha lenta e a ventoinha parou uma vez, tive que fazer a substituição da mesma, de resto é uma moto super tranquila.

mine is - 357 959 455F 250/80W AEG with low profile difuser. And I believe it is a way better than 1Fan cooling on factory Golf Mk2s.

Performed the test of the fans and noticed the main fan running really slow, so pulled it, tore it down, and the heat issues stopped.

Replaced my fans, and the fuse box/tray so far so good.

I have a 2014 Tundra and had my unit go out. I believe it to be heat related because I found the cooling fan on the unit not to be working. I blew it out with compressed air and it has come back to life ( was out for about a week). Out of caution, I am going to replace the fan.

I recommend replacing the mishimoto fans. Flow less than stock.

Don't touch Mishimoto fans. THEY ARE SO BAD!!! And horrible fitment.