Owner reviews for brake pads

I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.

Put 306k miles in 13 years, on my brand new '07 Silverado 1/2 Ton before I sold it to a mechanic at my preferred shop (leak in the fuel system/tank that was going to require removing the bed etc).\n\nPrior to that issue, I never had a single thing go wrong with it. Tires, brake pads (original set lasted 200k miles), oil/tranny fluid changes, air filters, wiper blades, were all it ever needed.

Used them twice. Both times had excellent speedy service for a good price. Both times were brakes on my 3 series (front discs and pads, then rears). Saved a significant chunk of cash.

I'm running the cheapest coated rotors from rockauto and Pagid "OE" pads and I'm happy with it.

I did a similar Brand: Power Stop Z26 Streets and I think they’re fine. Anything will be better than the OEM padding/Rotor. Didn’t even flush brake fluid, they did take a few drives before fully losing the squeak/grind sound when approaching full stop even after doing required bedding process. I’m at 72k miles on 2019 3.3t

I just did Akebono ProAct pads and Advics ultra-premium rotors from Rockauto. I'm pretty happy with these. Was using Wagner pads, the initial bite was better but the amount of brake dust was pretty substantial in comparison.

If you KNOW you're going to be doing a lot of track days, you definitely want to go straight to some full blown track pads, at least for when you're at the track, along with fluid.

Ether Motul RBF 600 or Endless RF650 brake fluid is a good options. As far as pads go Ferodo DS2500 is a great pad for street/track. It has relatively low dust and noise levels compared to other track pads, yet still has moderately high bite and solid fade resistance of a track pad.

VW of macon charged me over 600 for just the front pads and rotors - that's with a friend's and family deal because my dad used to work there. Apparently the OEM parts are super steep.

If you’re going to run lap after lap they don’t hold up.