I would recommend the TRW ultra pads from the official ZF store on eBay. $50 total for front and rear. They’re a tier 1 oem supplier, and the ultra line is their premium aftermarket offering. Similar to akebono and the pro act line which isn’t available for the 4th gen. The solid Bosch rotors would be a good choice. Centric as well.
Honestly for everyday driving the Bosch and centric is a good combo. The powerstop are very grabby and have a bit more stopping power but it’s not worth the extra money, plus long term normal rotors are better. Drilled/slotted don’t have as much durability
Yes to the Bosch/Centric combo. No to drilled rotors on a daily driver.
I'm very happy with my ebc sr11 on my type r and so are several others on the forum. I daily and HPDE with them.
I have Brembos on the front of my 09. Working great for me.
I had this problem too and I saw in other forums quite a few other people as well. I used Bosch pads too I think (can’t recall right now) but when I compared them to the OeM ones I removed, there was a difference similar the the gaps you pointed to in your pic. Putting the old OEM ones back and the gap is not there. So what I ended up doing was simply added a bit of shim to one side of the Bosch pad to take up the gap and the problem went away. I put the shim only on one side, the side that would be compressed when in reverse. FWIW others have tried other brands of pads and they all seem to have the same issue. Apparently the only ones that don’t are the OEM ones for some strange reason. When I compared mine, it wasn’t the pad backing that was causing the delta, it was the shim.
After lots of research I did Powerstops about 10K miles ago and absolutely love them!! I’ve done lots of brakes jobs on multiple different Toyota/Lexus trucks/SUV’s and normally OEM perform best, and I wouldn’t normally do drilled/slotted, but on these big heavy Sequoias they really perform so great…highly recommend!
EBC OE Blanks w/ Red Stuff. Low dust and great bite.
You will need brake cooling/ducts or will need to remove the dust shield to get more airflow (or both), went through a brand new set of rear Pagid RS29 endurance pads in less than a weekend in July when I first got the first F80 years ago. The heat did a number on them in the afternoons with ambient temps over 90 and all the 150ish to 40ish and 130ish to 30ish on the back and front straights respectively
I have 4,800 miles on a 2023 MK8 and my brake pads are sticking to the rotors.
Write your review about brake pads
Help others - share your experience with this part.
