Reviews of MotoRad parts For Business

The SNN-2000-195 model is good and I have zero complaints about it. I've used them for awhile now.

All I could get on short notice was a motorad...been in there over a year now and haven't had an issue. It's an OE 195 temp and seems to open around 205-210.

I found an exact copy of the factory thermostat with the baby one next to the primary the Amazon description says it’s good up to a 2000. It’s a Motorad. My temp never moves from the set point.

I had a Motorad radiator cap until about a week ago. Worked fine just changed it for a spiffy Flex a Lite cap.

issue that i noticed is that the jiggle pin is inside the bridge, compared to the standard one. i have installed the thermostat, bled the coolant, and still made sure that the jiggle pin and head gasket carve out lines up at the 12oclock position when installing; but now theres some ticking noise sometimes and i can feel my heater blowing really hot air (warmer than the usual heat).

Motorad isn't a good brand. You don't want to do the job again in a year.

Installed a Motorad thermostat and noticed the temp gauge dropping on the highway. I never had this issue before I changed the tstat

Had a Motorad Fail Safe a few years ago and it was a POS.

Tried a Gates from RockAuto and it was a Motorad in the box. Installed it anyway, it seemed to hold the temp *lower* than the 170 Stant did, and my engine cooled all the way down to cold when I went down a long grade.

I tried a parts store Motorad, failed. Tried a Napa gold stat that turned out to be repackaged Motorad, failed.