Mazda 5 parts reviews

If you're keeping the vehicle (make sure you're keeping it), then I second getting the raybestos from Rockauto. Make sure you get the raybestos element 3 fully coated rotor and pad sets.

Even if your friend's dad does it free, maybe drop him $100 or $200 for the labor.

So $200 total. And less dust than OEM with decent stopping power. I went with this combo cause it's balanced stopping power and rotor longevity.

I'm going with Akebono ProACT for less dust.

The OEM rotors wear very quickly. The OEM pads are Akebono semi organic which are actually pretty good. However the OEM pads create a ton of brake dust which makes the wheels look terrible. When I replaced mine about a year ago I went the aftermarket route and used Raybestos rotors and pads.

So I followed their direction and jumped on the old interwebs to my retailer of choice, RockAuto, and ordered Bosch pads and rotors front and back. So I had nothing planned for the weekend figured I would do a little wrenching. Take the wheels off and start to unbolt the caliper, looked down and my rear pads still show about half life. Maybe they just meant the fronts, pop the wheel and they are showing even less wear. My question is it normal for the CX-5 to go 80000 miles on the original pads? I didn't think I drove like my grandmother but it is 70% highway/non city driving. For anyone that does your own maintenance the cost for 4 rotors and pads was less than $200 (Raybestos Element 3 rotors and Bosch Quiet Cast ceramic pads). It really a fairly easy job, and would not take more than 30 minutes per wheel.

AKEBONO PRO-ACT ULTRA PREMIUM are available at Napa and I hear are some of the quietest brake pads you can get over the life span of the pad. They're ceramic pads which won't make your miata sound like a school bus

Stoptech street performance (I believe renamed to Stoptech sport) has always been my go-to for spirited driving and track day use in a miata. In faster heavier cars, I use carbotechs for track days, but that's just overkill for a miata.

Akebono ceramic brake pads on RockAuto. Done, easy. They're an OG Japanese OEM, so you can expect consistency in quality. They're expensive but they're good and if you're going to get down on your knees and pop the wheels off you might as well do it right and get powerful and silent braking power for your trouble.

I had a 2009. I replaced the rear shocks, they were gone by 50K.

Conti ExtremeContacts are noisy. I have them on my Mazda5. The tires are especially loud when they are cold and moving at low speed. They feel like good tires and seem to wear well, but the noise factor alone makes me want to not keep them for too long.

As also mentioned above the rear shocks suck. I got Koni for lifetime warranty and already lost one rear shock after 2.5 yrs.