Best Brake pads for Ford Mustang

But the EBC SR11 and SR21 pads have been a game changer for us with regard to wear rate. We run these on our endurance race car and so far they have blown everything else we have tried out of the water. We just started using these so my experience is limited. But we just ran an 8 hour enduro at the ridge and used 1.5mm of front brake pad. This length of enduro at this track would usually consume an entire set of front pads down to damn near the backing plates. This is on a fox body mustang that’s 2600lbs and makes 330whp.

I run carbotechs on my GT350. Multiple weekends on them.

I used the powerstop z26 with mine. Work great, less expensive than original equipment.

You have a Performance Pack car. The wheels are a dead giveaway. Those Brembos are stock. I ended up going with Power Stop Z26's on mine.

Powerstop Z26 pads are pretty good for the price. G-Loc GS-1s are nice for street use. Both are low dust.

I had the same problem on my 2021gt500 and the dealer put in new pads, solved the problem.

Is it a reasonable price? No not really. Can you just do it at home in the driveway? If you have a driveway, and it's nice if you have someone around who's done it before who can remind you to do things like properly torque the bolts instead of just "by feel" if you're new to this, or add a little anti-seize on the hub so you can get it off in 5 years, without giving you silly quirky advice like a lot of YouTubers like to do to try and make themselves slightly different. What _should_ you do? My suggestion is call a few local shops (even Ford dealerships if you want). Tell them you've got some rotors and pads (order some standard ones off of Rock Auto) and ask what they would charge to install it. Call 5 places, ignore the most and least expensive ones, and if the remainders pick the one you like the look of (check online reviews, see how long they've been in business, etc). Every mechanic has been changing brakes since they were 12, but you want one who looks like they care about their work. A good mechanic with a 2 post lift should be able to do a Mustang brake job in like 20 minutes if they tried to. They'll actually take about an hour and be careful about it. They'll charge you some "standard" hours regardless of clock time because they need to pay for their shop etc. It's cheaper to do it yourself, but not everyone _wants_ to do it themselves, or trusts themselves to learn something from YouTube videos that their life depends on every day.

I have a set of these on my mustang and they're fine for daily use but if you're looking for performance go with something else

It came with Brembo brakes, I have used them for about 75k miles and they are starting to make terrible noise especially when cold. They were making noise since maybe 40k miles but everytime i asked dealers to check the brakes they said they are fine. Even right now they brake perfectly fine but they make awful noise until they heat up.

I ran them on my mustang. They were dirty and occasionally loud. They also didn't last for shit as I believe they are really formulated for lighter cars.