Those are what are known as track day pads. I use them a lot for autocross I'll use them for track sprints, I use them in the rear for full track days. This is on a Mustang with the six piston brembos in the front and the standard single piston calipers in the back.
I put these on my 08 Mustsng GT. They work really well. Little to no break dust. Just make sure you read the break-in instructions on the box. I had to break mine in when I installed my calipers, rotors and pads from Powerstop
Running Hawk DTC 30s on a Mustang (3800 lbs with me) both front and rear. I brake hard and the car is heavy. The pads don't glaze nor fade. Wear is OK.
Ran this set for the last 3 years, about 20,000 miles. They look and work great with factory calipers (I painted mine while I was installing).
Been doing some research and debate myself. Come to the conclusion I would stick New Edge brakes in there. V6 and GT got the same brake package, and it's pretty robust, easy to find, and cheap. Remember it's designed for a 3000+ lb car and you're going to a 2400 lb car, so it's already overbraked, and being light it'll be easy on its consumables.
My stock OEM pads are Ferodo DS2500 and I love them for daily and light track days.
So I don't work for Raybestos but I do install a ton of them. Those EHT are really good for normal vehicles. The price is right, dust is low, pedal feel is great, friction is about on par with OEM and in some cases better. They will survive about 10-15 medium effort stops, and about 3-5 Hard ABS stops. I wouldn't put them in anything bigger than a 7-Seater V6 Crossover, and the weight of those is on the limit of what the pads can do, but over all very good.
I used these Hawk brake pads for a HPDE track day so they did get very hot. They still have 10mm of thickness left, but this particular pad has these very pronounced cracks. All other pads have very minor cracks (barely visible), but this one was the worst.
Write your review about brake pads
Help others - share your experience with this part.
