Ford Fusion parts reviews

For Gen2+ use the Motorcraft OEM blades. They are designed for the windshield and have specific models for the drivers and passenger sides.

All are legit, and I would also vouch for Nexen. I put a set of Aria AH7 on my '19 Fusion, and they are quite nice for the price.

My ‘14 has the 1.5L and 140k miles and no problems. Replaced shocks and struts and the A/C condenser from a rock that came through the grill.

For my 2010 3.0L V6 Fusion I loaded up on the Havoline Pro-DS full synthetic 6quart eco boxes in the 0w20, 5w20, and 5w30 viscosities and always run a Motorcraft FL-500S filter.

Every 5k for my fusion. I buy Mobil 1 full synthetic and Mobil or Fram filter from Walmart and do it myself.

i run these tires on my Fusion, they are low profile, have good traction. As they are low profile, performance tires, they transmit road feel more than normal tires.

Plus I've been told its a better filter typically from the dealer.

A friend of mine had a 2010 ( or 2009 ) Fusion Hybrid that needed a new battery, he went to the dealer and he was quoted over $8K. He then found $3K 'aftermarket' batteries and at the end he was able to find a shop that did the whole thing for under $2.5K.

I also replaced the valve cover gasket because it was weeping a little oil in the spark plug tube. That's a known issue on the 2.5Ls.

I put their shocks on the rear of my 2016 and they suck ass. Been on there for a month and next paycheck they’re hitting the trash pile.