Thermostat MOPAR or Gates

Replace stat with a Mopar 195f unit for optimal results.

i personally run a 90c/195f one, the GATES 33209. it gets cold here in WI and it will hold 192f on the highway with the heat at speed 1

I have an 06. Had the same issue. Bought a cheap thermostat which turned out to be no good but acted the same as the old thermostat. Then, I changed EVERYTHING else in the coolant system, lol. Switched to Gates, problem solved.

To complement this, the Gates thermostat I bought for a Mercedes M272 engine was identical to the Mercedes A2722000115, except that the Mercedes logo cast into the housing had been (mostly) ground down.

I replaced the one in my sisters V8 WJ with Mopar and it was made in Israel and very high quality.

I’ve got the gates 180, 5 years strong no issues

Man, you just get the thermostat itself. Nothing more. Something like that was for 2008 Rabbit (2.5 I-5). Mine car had exactly same symptoms. It would reach 70 C and maybe at some point 80, but had tendency to stay cool (below 80) when driving. I know thermostat opens at 80 C, so anything below 80 is not quite right.

I got the GATES 34710 Thermostat. I haven't had any problems since replacing it 3 years ago.

Oil cooler and radiator. I changed the thermostat when my radiator went. I would recommend using a mopar thermostat as I had two aftermarket fail on me

I had a very similar issue. Radiator and Thermostat replaced after accident. 2014 WK2 3.6 V6 was overheating when I drove up the mountains in Colorado. The problem was the mechanic put a Napa thermostat in, then replaced with another napa thermostat. I bought a MOPAR thermostat and swapped it myself.