Shock absorbers Bilstein or OEM Toyota

I too decided on the Bilstein HD shocks front and rear. They are definitely better than the worn out stock shocks. The MV is flatter now in the corners, and dips in the road are not followed by the "dolphin dance".

I replaced the limp stock shocks on my 2002 Weekender recently. I used Bilstein B46-1911/12 (the "HD" ones). The ride manages to be both smoother and more controlled.

I replaced the worn shocks in my 1.8T with some Bilstein TC (touring class, OE replacement shocks) a few years ago, and I liked them very much. Compared to the stock shocks on my 1.8T, they are a bit stiffer, but still extremely compliant.

The Bilstein sports in my corrado ride nicer than stock.

I think I saw someone mention Bilstein heavy duty shocks. I also recommend them. I love the way the van rides on these, and I don't consider it harsh at all.

Remove one of the clamps holding the rack and as I recall, loosen the other one or perhaps remove it as well (been over 10 years since I last did it). Then pull the rack away from the firewall, loosen the jam nut and screw in the adjuster a little. Will probably take you a few times to get the feel of the adjustment.

There are three settings for the Bilstein Damptronic shocks: R, Sports and Comfort.

So I dumped the KONI Sport and opted for the Bilstein HD with stock springs and a rear bar. What a dramatic difference, still a comfortable ride and very tight around corners.

Adding the Bilsteins made such a huge difference in the handling of the car! Stock shocks are sloppy by comparison.

i used bilstein sports with my gc setup...the bilsteins worked great and did everything they were supposed to.no more dive and squat.body roll was kept to a minimum and it offered GREAT comfort, but it just wasnt what i was expecting.