42
No data
42
No data
Here's the solution : your cam shaft position sensor is overheating and trying to save the engine by shutting it off prematurely instead of forcing limp mode. The fix is to use a Hyundai OEM oil filter, and check the gaskets/seals, then replace the cam sensor and crank sensor. I did this and never had a problem again.
Buy Castrol Edge and the long-life filter from Walmart for best engine protection.
I did Castrol Edge Euro Car 5W-40 with a Hengst oil filter, but if you want to spend a little extra most people recommend LiquidMoly
I used the Castrol once, and have been buying the assembled kit from ECS ever since. At 73K miles, now, and change it every 7-8K.
I'd change the oil and filter with a Hyundai filter. Oil doesn't matter so much. These engines are very temperamental when it comes to the filters as they get higher in mileage.
All you need
to do is change your oil
And oil filter every 5000 miles OR 6 months using a high quality FULL SYNTHETIC Oil and a quality ( HYUNDAI) oil filter!!
Try to source OEM Hyundai oil filter though. I've heard that ticking before with non-OE filters, and regardless of what shops tell you the OE filter can make a difference.
72 dollars at my dealer, 120 everywhere else.
With Full synthetic oil and a HYUNDAI OIL FILTER and crush washer.... $70-100.
They overfilled my Elantra Sport one time by two quarts but it's okay because they didn't tighten the oil filter down so it leaked out all over the place. I caught it quickly so no damage done.
Write your review
Help others - share your experience with this part.