Oil filter Motorcraft or Mobil

Personally I’ll ONLY use the manufacturer filters on my vehicles and I’ll look through the catalogs to find the largest filter that fits. I’ve been using Motorcraft FL1As on my pu for the 28 years I’ve owned it and it’s cheap insurance.

I use 5W-30 Mobil 1 synthetic and the 10,000 mile Mobil1 filter from Walmart. I bought my 2009 TSX nearly 4 years ago with 113,000. It now has 178,950. I'm lucky it doesn't burn any oil, I never have to add oil between changes.

Every third oil change use Mobil one oil filter. Ideally their high mileage one. It’s more restrictive. It can and will catch metal particles

I've always had good luck with the FL 820s in a 3.0.

For oil filter, I run the same one on my 302 and 390: Motorcraft FL-1A. I believe it is (or was, at least) made by Purolator and is my go-to for my old Ford V8s.

I'm at 115k on my 18' Pilot exclusively using Mobile1 0W-20 synthetic (green gas milage label), changing myself every 8,500miles. I replace with the M1 advanced 110A oil filter and change the engine air filter + cabin filter as well, since new. Discard oil is dark, with a smell thats mild but says, "it's time".

I do use Mobil1, PenzPlatinum, or Valvoline and replace the filter with each change.

Plus a Mobil1 20K filter.

My buddy changed oil, and used a Mobil1 filter in his moms Hyundai. It knocked right away. Changed to Hyundai filter and knock quit.

Got a 2015 scion XB, I changed the oil every 3000 to 3500 miles and I use a mobil1 M1-103A oil filter, I always put it on as tight as i can with a bare hand, every 3000 miles the oil filter loosens up.