69
No data
69
No data
4,6 Liter LM TopTec 4200 (Gebinde von 5 Litern ca. 40 bis 50 Euro), Ölfilter Mahle OC456 ca. 13 Euro, Dichtring für die Ölablassschraube
i keep using wix and haven’t had any issues
Subarus are honestly for the most part pretty easy to work on. Oil + filter changes are very easy. 30 ft/lbs, only use oem or wix filter imo
DIY. Kirkland 0w20 full synthetic 5qt - 4-pack (20qt total) for $70. Buy a few WIX oil filters off Amazon for $10-12 each, and for $100 you can do 3 oil changes in your driveway.
Use an M56 filter, it's slightly larger. Been doing it for over 2 years. Over the counter Pennzoil Ultra Synethic 5w30 is fine, I use Redline 5w30, it's slightly thicker at temp. For a filter, you can't really go wrong with Wix, Mobil, or Fram Ultra. If you watch a tear down of any of these, they're all virtually the same. Fram are built in America and readily available, the Nissan filters are covered in glue and made like total crap in my opinion. But those three should be made in America. Lots of oil filter brands use Fram filters and slap their name on it, Wix too in Napa's case. If you change it every 3,000 miles you can basically use anything as long as it's a quality filter. Personally had nothing but good things to say about Wix and Mobil. Only annoying part about Fram Ultra is the stupid grip they put on them makes my filter wrench slip right off.. But I've used all three and had no complaints.
The $120 JiffyLube price is what got me doing my own changes….very therapeutic!
I enjoy it. Best GF-6A synthetic is 28$, best filter WIX is 10$, crush washer 25cents.
Disposal responsibly.
BTW the oil change places, use the worst filter and don’t change the crush washer…
CRV 250K miles. Burns no oil. Think it’s working ?
I use WIX 51036XP with synthetic oil on my 97 Tahoe since I own the truck (60.000 miles) and oil pressure is great.
I had an e90 with the n52 engine. When i first got the car i installed a Mahle filter that fit. After a bit of driving the engine started making weird noises, similar to vacum leaks. And I did som research. Apperantly my experiance was common with "aftermarket" oil filters. Switched to Mann filter on my next oil change, specificaly the same variant as the right one in your picture. The problem disappeared instantly. Also the Mahle filter had kind of colapsed in on itself.
and don't use store bought oil filters unless they sell Mahle or Mann.
Had a WIX 57312 instead of a Motorcraft EC-781. So yeah, it fit but it was allowing oil to bypass the filter completely.
Write your review
Help others - share your experience with this part.