Oil filter Mahle or Castrol

I use factory filters and 0w40 Castrol (German one) when it’s on sale for $4.99 a qt. I too have 100k on my 2015 gsw 5MT and runs great I been using that oil since new.

Engine oil: I use 10w40 in my rebuilt ABA/2H. No issues. I prefer Mahle filters.

I would go with 0w30 or 0w40. I changed my oil and filter at 1k with castrol 0w40 and it runs just fine. I did find a few metal flakes and slivers in my oil filter. Guess they were left overs from being built.

I have several VW/Audi cars and I use Mahle oil filters most of the time. I've heard some horror stories about other aftermarket filters causing some problems, particularly on the water cooled Vanagons (I have one). Mahle and Mann seem like the best option.

Putting together a cart on RockAuto.com Ignition : Distributor Cap - BOSCH Part # 03214 Ignition : Distributor Rotor - BOSCH Part # 04038 Ignition : Spark Plug Wire Set - BOSCH Part # 09273 OE Engine : Valve Cover Gasket - BECK/ARNLEY Part # 0361431 High Temp Cork/Rubber Engine : Timing Belt - BECK/ARNLEY Part # 0260176 121 teeth; Trapezoidal tooth profile; Neoprene construction for durability. Ignition : Spark Plug - BOSCH Part # 7900 {#7500, W7DC, WR7DTC} SUPER PLUS Fuel/Air : Air Filter - MANN Part # C2860 Fuel/Air : Fuel Filter - BECK/ARNLEY Part # 0430798 Engine : Oil Filter - MAHLE Part # OC108 Am I missing anything?

I like the Mahle filter because it has a notched end on it, no need for a filter wrench anymore.

I just recently purchased a mahle oil filter and it is made in austria, good to hear good quality stuff is still available after mann has let me down.

ooooohhh thanks for the tip. oh yeah, mahle oil filter, new cable bushings, new rubber type valve cover gasket seal, valve cover gasket studs, dipstick bushings, oil, and myriad other things are waiting to go in...

motor oil: Valvoline 20W50 dinosaur oil with a Mahle filter

Buy a 1.8t Make sure to do a T-belt waterpump service. Then use oem oil filters and castrol syn. 5w40(syn. is optional for VW 1.8ts but I would personally only run syn in a turbo car). Also flush the coolant system. If you do that you will have a 1.8t that will a very nice running car and will not do you wrong.