Oil filter K&N or Motorcraft

6 quarts of Castrol edge full synthetic 5w30 and Motorcraft fl400s

Make sure you get an oil that is dexos gen 2

I WAS using Subscribe and Save for Amazon Full Synthetic 5W-30 and Motorcraft FL-910S Filters, but they keep running out of stock

if you use the Ford/Motor raft FL400S, you can put all 6 qts in. Our engines benefit in some way or another from the bit of extra oil, iirc. Makes it easier than measuring out to get to the 5. whatever the stock filter size is

My ‘11 CR-V AWD is sitting pretty at 285,000 miles and I’ve been using a combination of Valvoline MaxLife Engine Oil High Mileage Full Synthetic and K&N High Performance Oil Filter for the last 100k miles.

Valvoline High Mileage w/ K&N Gold filter, I've had no problems, and it runs smooth

Also, use the best filter you can afford and that means K&N (I hate that VW Mann 3D world junk).

What I usually order with K&n performance oil filter.

I've used AMSOIL Signature in my recent change in my 3.8 with a K&N Filter. I gotta say it's pretty damn good. Engine cranks right up and feels so much more smoother.

The filter I was running was a K&N. I removed the old filter and it had totally collapsed. The oil light would come on at every stop in the first 10-15 minutes of driving. Especially in cold weather. After changing the old K&N filter that was in horrible condition, I have had no issues whatsoever.

Most cars in my house get cheap bulk ordered filters off RockAuto. Except the STI, that one has been getting K&N and soon switching to Wix. I’d never allow the oem trash cardboard filter near my car.