Oil filter Fram or STP

I run the ultra synthetic Fram filters , why cus they are made in USA. I’ve had no issues at all, my car has 330k miles bought it with 120k miles

Had an 05 Civic and put 100k miles on it. Used full synthetic + Fram filters every 10k miles. Opened the engine for a timing belt and it was squeaky clean, not even varnished.

I also recently saw one YT channel test Fram and it did really well. It was somewhat restrictive, but it held a lot of dust and did a good job at filtering.

I use the cheapest brand on my daily and no issues after 160k miles ????????

I've used them for 30 years and have nothing to complain about.

Ok... so as a DIY mechanic, how tight am I SUPPOSED to tighten oil filters? The box says 1 turn after gasket contact, so that's what I do. It gets pretty tight by the end of a full turn, but I'm still able to do it with my hand (so long as it has one of those rubber grip coated bottoms, like the Fram Tough-Guard). I never have to use a wrench to get it to that point, but it takes about all my hand grip strength to do so. Taking them off is usually requiring a strap wrench, and sometimes it dents/crushes the casing.

Fram filters are trash. I bought a fram for a new engine and upon fire up the lifters would clatter while it refilled the filter.

Fram made my oil light indicator flicker every time I turned from a stop.

Fram are by far the worst brand I've seen. Fram filters have cardboard caps on the element that can come apart. Some of them don't even crimp the ends of the element to prevent unfiltered oil from going through the gap.

when I took off the FRAM filter there was no oil that came out. After inspecting the filter it seems like it was not filtering out the oil at all. There seemed to be cleaner oil in it instead.

Just stay far far away from FRAM oil filters. I've had nothing but bad luck from those things.