Ignition coil DELPHI or OEM Audi

There is one benefit to running R8 coils on a stock TSI. They seem to be a hell of a lot more reliable.

I have a 2017 Forte with the regular manual transmission 2L non-GDI engine. At about 19,000 miles I started getting a strange sudden drop in RPM at random times (idle or on freeway). I would mostly notice the loss in power when it dropped and it would return to normal usually in less than five seconds. Never got any codes and car ran great 99.9% of the time.

As I approached 23,000 miles it got more frequent and finally threw a P0302 (Cyl 2 Misfire). I inspected spark plugs first. To no surprise they were in great condition. I swapped cylinder 2's ignition coil to cylinder 3, cleared the codes with my scanner, and the coders all cleared. About two days later I got a P0303 (Cyl 3 Misfire).

I ordered a Delphi ignition coil (GN10877) on Rockauto to replace the suspect ignition coil. Haven't experienced the issue since. Car also idles so well now that I can't feel it in steering wheel or hear it at idle.

I had no idea how bad that ignition coil was until it was replaced and was still shocked that it started failing at 19,000 miles.

So, I went to my VW/Audi dealers here in Tampa and purchased the stock RS7 spark plugs and RS3 ignition coils. The exhaust smelled slightly worse at startup after the change, but still went away shortly after startup. The idle was smoother but I attribute that to old stock coils and spark plugs.

The only thing I have are the R8 coils, other than that stock everything. The car drives mint

The Audi bolt-down ones are good. I replaced the push-down coils that had a failure about every year or two with the bolt-downs just a week or so befor VW announced the recall. Zero, zero, zero problems ever since.

I think the only difference is lifespan and reliability. I wouldn't cheap out on plug-on-coils because the budget companies don't take as much care with the wire insulation (apparently 2 different temperature ratings are acceptable, and the cheap companies use the lower temperature), coil material, or the epoxy that coats and insulates everything isn't as good or isn't applied as well.

I went with (6 of each) Delphi GN10168 coils & NGK 2262 spark plugs. $150 with 5% discount + shipping. I hope I made a wise decision.

So far I've replaced all ignition coils (1 died while I was test driving the car, the other 2 years after in the winter, of course). I decided to replace them all with non-faulty Audi parts instead of doing it every year.

Mine is working exactly as it should !!! My cam follower is wearing thin, my DV is busted, my PCV leaks just fine, and i'm starting to think my coils are also going bezerk (but thats fine cause it about that mileage)...

Delphi quality has drastically dropped over the past 2 years. We’ve gotten multiple DOA units, and ones that fail within 6 months.