Engine oil VALVOLINE or Motorex

Valvoline SynPower full synthetic ) 5-40 (P/N VV966) is not on the VW approved oil list. But it certainly is approved, just read the label on the bottle:\"VW 502/505/505.01\"

A lot of the guys I know ended up running valvoline VR1 20W-50 (A Dino oil, fwiw) because that was the only thing that keeps their rod bearings alive for more then a couple of weekends. Switching from thinner oil to that made the difference between changing bearings every couple of weekends to once a year.

Valvoline Synpower 5W-40 also meets Volkswagen specifications.

i use valvoline 5w 30 and it hasent done me wrong...yet

I also have a 2.0 and run the valvoline synthetic. I started after 2500m and am currently at 29k. No scientific results here other than keeping track of mileage in a little notebook and looking back at the first month compared to the most recent - I'm averaging about 7mpg more.

All these problems are not present in the Valvoline SuperSynth 5W-40 sample. Furthermore, the results from this Valvoline are well below the Universal averages for this engine. This suggests that I should be able to run this oil for at least another 1000-2000 miles and still get an excellent report out of it! With it, my engine runs bit smoother and quieter especially at idle. At high engine speeds the engine feels more responsive and more lively. Another difference is that with Valvoline, I am observing improved efficiency. My 2.0 broke its own record of fuel efficiency: 34.3 miles to the gallon on high way. The improvement is 3.3-3.9 miles per gallon compared to Mobil1.

Interesting. I've been using Valvoline synpower 5w30 since 5k miles, currently almost 75K miles.

on both my current 1.8T VW'S i use Valvoline Synpower 5w-40 Full synthetic- it's an oil that is approved by VW...and has all the right cleaners/additives in it.

5w-40 valvoline synpower is the only synthetic (besides VW Dealer supplied oil) that has VW approval...says so on the bottle if you have a NAPA they can get it for you....i use it year round......

Valvoline SynPower 5w40 is perfectly fine for 10,000 change intervals. As long as it meats CI-4 or VW505.00 or ACEA B3, it's a perfectly ok oil.