Engine oil RED LINE or OEM FORD

OEM FORD Engine oil

On a side note, if anyone really wants to see what their oil change interval should be, just get an actual oil sample analysis done. Per the lab reports, I can get 8k miles on quality synthetics and still have a good safe margin for oil life.

Pros: good safe margin
Mileage: 12875 km
Comment
Is this review helpful?
source
RED LINE Engine oil

Redline recommended 10w-40 Full Synthetic for my 1.8 solid lifter JH turbo application and the tech guy suggested modern synthetics don't cause seal leakage (like OG synths of 25 years ago) and holds up way better than the 40w rating in hot temps and protects much better when cold than even the current crop of Castrol 20/50 dino oil I was running. I swapped over the M81 to the same Redline oil and have not yet noticed any new oil leaks yet.

Pros: no seal leakage, better hot/cold protection
Vehicle: Volkswagen
Comment
Is this review helpful?
source
RED LINE Engine oil

Redline 5w 40 since break-in, 254k miles later engine still going strong. Plenty of other repairs done, but no internal engine repairs required.

Pros: engine still going strong, no internal engine repairs
Mileage: 408772 km
Comment
Is this review helpful?
source
OEM FORD Engine oil

I red-line 1st and 2nd gear when merging onto highways from the on-ramp. But then cruise at 100 kmph on the right lane. Gotta have fun when you can! Ensure that **oil** temps are good, not just the coolant.

Pros: fun when merging
Comment
Is this review helpful?
source
RED LINE Engine oil

I had Blackstone do a Virgin Oil Analysis of Red Line 5w30 This sample of Red Line 5W/30 looks good in testing. The viscosity is just a little above our \"should-be\" range for unused 5W/30, but that's common to see with some brands, and it doesn't show any sort of problem or deficiency with this oil. The additive package is typical of Red Line. They use a lot of molybdenum anti-wear additive. There's also some silicon, which is good to know about since silicon can also show dirt in used oil samples. It's an anti-foaming additive. No moisture or solids were found. This oil is in serviceable condition.

Pros: good in testing, anti-wear additive
Cons: viscosity slightly above range
Comment
Is this review helpful?
source
1 ... 3 4 5 6 7 8 9 ... 10

Write your review

Help others - share your experience with this part.

Other comparisons
Loading...