Engine oil PENNZOIL or OEM Audi

I tested it myself on my 3.0T, pumped everything out with the extractor, then jacked the car up and pulled the plug, catching evening that drained out in a measuring cup. It had less than 1/4 cup of oil left in the pan.

Did this every oil change on my sq5. Made it 180k miles before trading it in. Works very well. That was the easiest oil change I’ve ever done. Of the 15 minutes the job takes, about 4 of those minutes is actually doing something

Definitely prefer the extractor here! So easy/clean and gets all of the oil. At least in a Q8 and b9 A4/5 it got everything

I’ve done both and extractor takes out like 97% of oil. I still had about a half cup when I pulled the plug.

I prefer ultra platinum over mobil 1 since ultra is used with a group 3+ base oil, which has better heat handling than regular group 3 oil.

I use pennzoil ultra platinum 0w-20 and a purolator BOSS filter

I use Pennzoil Ultra Platinum 5w-30.

2020 Telluride with 80,000 mi still going strong with Pennzoil Platinum Ultra at regular change intervals.

2012 3.0tfsi turned out to be a mild hybrid as it burns 1l/5k km.

I tried pennzoil and didn't like it. The engine developed a soft tick after about 3k miles. Went back to Castrol and the tick hasn't returned.