Brake pads WAGNER or Mintex

Just get standard oem supplier pads from someone like Mintex. They’re going to be everything you need for a daily driver.

My favorite is Wagner OEX pads. They're build on galvanized steel and the friction material is mechanically attached instead of glued on.

Wagner OEX or Bosch Quietcast

Both are ceramic brake pads that will last longer. Brake fade is experienced in all brakes used excessively but it takes a lot longer in ceramic pads. The only draw back is stopping distance is slightly increase when cold but when warm it's decreased. Bonus is they produce less dust & its very light in color so your wheels look cleaner.

The best pads out there right now are the Wagner OEX pads cuz they're built on a galvanized steel backing plate with a mechanical fastening system for the friction material instead of glue. They don't rust out like plain steel pads

Wagner OEX brake pads are some of the best around. They're built on a galvanized steel backing plate to reduce rust and the pad material is connected to the plate with a mechanical attachment system instead of glue. Wagner is a Tier 1 supplier to several carmakers.

Wagner, Centric, Raybestos, Akebono are all very reliable brands. However, each one makes an economy, OEM and premium version. So don't go by brand name alone. Wagner OEX pads are premium quality. They're built on galvanized steel backing plates with mechanical attachment versus adhesive to keep the friction material on.

I did a change on my moms 2011 Malibu last year. She barely drives and we live in northeastern MA so after 9 years and 21k miles later they just rusted out. Pads and rotors especially the rear parts. I used Wagner pads and rotors and been using them for many years with great results.

Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.

I have some noise from the mintex pads as well. Im switching them all out soon.

You wanna avoid mintex red box these days. The passat pads have a slight problem with burning up under hard braking.