Brake pads TRW or WAGNER

I got the ceramic TRW pads from FCP euro. You can find them from ShopDAP, VW dealership, etc. There’s multiple OE suppliers that all work great: TRW, Pagid, Textar. You can also go for the semi metallic equivalent if you want a little extra bite. I believe they all come with the wear sensor, you can simply cut it off at the base and pull out the wire. I’ve done this twice now, no problems. I suppose you could use the advance auto ones if you already have them, but just know they probably won’t give you as much bite as the stock pads, and may end up causing some warping over time since they aren’t designed for the heat temps.

Wagner, Centric, Raybestos, Akebono are all very reliable brands. However, each one makes an economy, OEM and premium version. So don't go by brand name alone. Wagner OEX pads are premium quality. They're built on galvanized steel backing plates with mechanical attachment versus adhesive to keep the friction material on.

I put Wagner on mine. They have been good for around 35k miles on them so far. I don't see me replacing them for another 15k. I didn't like the OEM one and braking is really one of the weakspoints for the Mazda 6.

I highly recommend Wagner OEX pads. Galvanized steel backing plates. Quiet. Long lasting

Job got done in about three evenings Biggest time sinks were figuring out how to use the caliper piston compression tool and getting my overtorqued/rusted lug nuts off. Drove up from Maryland to NYC with no problems so I think I did the job right.

I purchased Durango rotors and Wagner brakes for my 2015 cx5 back in May 2018. According to my buddy my brakes were only 50%/35%(front/back/) done. I told him to change it anyways since he pulled them apart anyways. That was around 105k. Around Jan 2020, the rear brakes were squeaking. My buddy pulled them apart, and the rear brakes were completely done. The odometer was around 190k . I replaced them with centric rotors and power stop pads. The front was not changed as it looks like 70 left.

I have the TRW TPC1633 ceramic pads installed, perfect fit (OEM) and brake as good as stock...actually smoother. Dust is reduced maybe by half.

I’ve honestly never had a problem with Wagner. Just installed QuickStops on my wife’s Altima. They are quiet, and they bite just as hard as OEMs.

TRW Ceramic pads, look identical to OEM, since TRW makes the OEM pads. Feel same as stock, way down on dust.

Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.