Brake pads Textar or Raybestos

I'm using raybestos SP436ATRH for the pads and raybestos 96632FZN for the rotors. Been using them since January and have put about 6k on them, living in a really hilly area with my drums being basically useless because the shoes have been coated in gear oil due to an axle leak. I javent had any issues with brake fade or warping and I took them on a 2hr trip to west virginia from central ohio in March.

I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.

On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.

For aftermarket pads, Raybestos have had very good fitment and quality, I dig it. Their product line is called like "el3ment" or some such.

I would go with the Raybestos Element 3 kit sold here. $180 total roughly front and back. 2 seperate kits, one for front, one for back. You will find this under the fully coated section here as they have different grades of pads. For the price and how long these last, you cannot beat it. And better than the top quality parts local parts stores carry, in fact Napa sells these rebranded as their premium top of the line brakes and rotors. For the price, and the quality, is by far your best option. There are better pads that will last a little longer, but are much more pricey. With the miles you drive, these will last 5-10 years. I use these on all vehicles in the rust belt, as these are rust coated.

I bought Raybestos Element 3 Hybrid pads and couldn't be happier. They squeal a tiny bit when very cold but I trust these brakes to get me down a mountain.

If you're keeping the vehicle (make sure you're keeping it), then I second getting the raybestos from Rockauto. Make sure you get the raybestos element 3 fully coated rotor and pad sets.

Even if your friend's dad does it free, maybe drop him $100 or $200 for the labor.

So $200 total. And less dust than OEM with decent stopping power. I went with this combo cause it's balanced stopping power and rotor longevity.

The OEM rotors wear very quickly. The OEM pads are Akebono semi organic which are actually pretty good. However the OEM pads create a ton of brake dust which makes the wheels look terrible. When I replaced mine about a year ago I went the aftermarket route and used Raybestos rotors and pads.

Raybestos Brake Pads - SGD924C - $25 obo

I installed these less than a year ago on my 4runner. At first, I thought the squealing was going to go away after I broke them in. But almost a year later and they squeal really loud even if I brake slowly at low speeds.