Brake pads Textar or Bosch

I got Zimmerman rotors and Textar brake pads for my 2013 550i with the M package. Everything is been working great for the last 6 months.

At the shop I run, we use textar pads on Zimmerman rotors. For some reason textar on textar always make noise on BMWs ( we elevated our complaints all the way to Textar, and they sent a rep to finally shrug). Pagid pads are ok, but I find they wear out more quickly.

When I bought my 17 PP the previous owner had Bosch pads installed that screeched nonstop, i avoided driving through parking lots because of how bad it sounded. I replaced them with Brembo pads and couldn’t be happier

My go to brake pad is Textar. Why? Less problems. Since I own a shop, any warranty issue is wasted time. I will not charge a client to make it right. I do not have time to do the job a second time.

I just put Bosch QuietCast pads and rotors on my Volvo and they’re great.

I replaced my front brakes recently with Textar pads and new Zimmerman rotors (non-PP brakes). Overall I am happy with them; I think they have a little more cold bite than the original pads do but are very similar to the stock pad compound. Original pads left deep grooves/ridges in the rotor around 55k miles. I don't track/autocross the car and I'm pretty easy on brakes. I also prefer and good cold bite which you don't always get with a ceramic pad.

On my recent rear brake job on the Mazda5 I ordered Bosch pads through Amazon. They seem to be doing the job and I have no complaints.

I stick with oe (Textar). Work great for me.

I installed new front brake pads (Bosch quietcast 621) and they squeal when I'm driving with them. It doesn't seem to be generating a crazy amount of heat or wear but it's really annoying. So it turned out it was the clips that came with the pads. When I installed the new pads I didn't pull out the tab on the bottom clips. Driving with the new clips damaged them so they were no longer usable. I took the pads off and put the old clips on properly and the sound was gone.

For my (owned 3 years, purchased used) 2014 Honda Crosstour I've always had to grind down the edges of the pad mounting plate tabs on Bosch brakes a couple of mm to get it to fit into the calipers. I have just received a new set, and while I still had to grind down the edges to get them to slide into the calipers, the top and bottom edges were MUCH shorter than the previous pads. So much so that when braking after reversing direction, the pads will shift in the calipers with a noticeable 'click' as the brake pads engage the disks to slow the car and are thus moved to the other end of the caliper. The overlap between the brake pad plate and the 'C' in the caliper where the tab meets the caliper is only 2mm or so. Definitely less than I am comfortable with.