Brake pads Raybestos or Project Mu

I’ve ordered the Raybestos Element3 for multiple vehicles and been happy with them

The Element 3's have treated me very well on multiple vehicles now.

I'm in WNY and run the Raybestos fully coated rotors and ceramic pads on my truck and wife's SUV. No issues so far after 3 years.

I would raybestos element 3 and akebono pads on my Lexus rx300. No complaints.

Raybestos Element 3. They last a while and bite pretty well when braking hard

Pretty happy with them so far.

Depends what you're after. If just street with some spirited driving, smething like pmu hc+ or ns400 works. I do track work and used to run hc800s, but got hc+ thinking they are the same. Only 600c rated instead. But, good cold performance, and extra good performance hot. So, they don't wear out super quickly while daily driving. Got quite a lot of track days and driving out of my original hc800s with t3 rotors. But, they are harder to find. Need to get the shape from pmus website, and then find somebody that stocks them. Rhd japan may do

i went with Raybestos Element, after reading they performed OK, and the price is fairly inexpensive. so far OK with minor issues. during installation, i shaved a hair off the pad material and the pad ears to get them to fit not as tightly. and after installation, the pad sometimes makes a click sound when changing direction of travel, or sudden acceleration after a complete stop. i think the pad is moving around in its mount and making a sound. did some searching and this might even happen with OEM to some people. i added more grease to the pad backing, noise went away for a few weeks, but later returned.

I use these pads (and rotors) on my FX35. A couple things I have noticed:

1). There have never been appropriate rattle clips included with any set of pads that I have ever purchased for this car…ever. I am still on OEM stuff at 180k miles. That isn’t just Raybestos. I even ordered Centric hardware…no dice. Not even close. Mind you, I always order model-specific hardware. No idea what the issue is, but it is clearly for the wrong car.

2). These pads take a few stops to heat up, which I kind of expected. I am satisfied with them on my daily, but the rotors are another matter entirely. They all warp within a month or two. That is odd considering they advertise the construction as Dura-Bar. That should be pretty resistant to that kind of thing. They definitely don’t hold up like Centrics do.

3). The shims have a nasty habit of falling off. Not while driving, but during service. You have one maybe two removals before they go MIA.

Other than that, I am not sure that I have noticed an issue with the pads being either wrong or out of tolerance. That is very not what I would expect from a brand like this.

Also ordered Raybestos pads and rotors.

3) Lastly, the brake pads' bodies are the right dimensions to fit the caliper brackets, but why would the friction-material footprint be so much smaller?! I can only think of negatives with using these.