Fitted my 2017 with new front/rear brakes and rotors yesterday. I went with the daily driver level Raybestos brand kit from Rockauto. Included both pads and rotors with hardware. Did the work myself. While I obviously can't say anything about longevity yet, performance seems good so far. Especially for the price when compared to over double for Duralast from my local AutoZone.
You'll find most common needs (brake pads, etc) in stock everywhere, and rarer parts will be easy to find in a day or two.
Mk6 2.5L A/T. They just work. Brakes last forever, no engine or transmission issues, none of the weird mk4 body problems with windows or wipers, just great cars.
I've had great results from Raybestos ST43s and Ferodo DS2500s for dual duty.
I'm using raybestos SP436ATRH for the pads and raybestos 96632FZN for the rotors. Been using them since January and have put about 6k on them, living in a really hilly area with my drums being basically useless because the shoes have been coated in gear oil due to an axle leak. I javent had any issues with brake fade or warping and I took them on a 2hr trip to west virginia from central ohio in March.
I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.
I replaced the pads and rotors on my Jetta this past spring. I put on Raybestos Element3 pads and coated rotors, and I've put maybe 6k-ish miles on them since then. Everything was fine for a while, but lately a squeal started to slowly develop until now it's every time I use the brakes. It sounds exactly the wear indicator noise I'm used to hearing when pads are low.
VW of macon charged me over 600 for just the front pads and rotors - that's with a friend's and family deal because my dad used to work there. Apparently the OEM parts are super steep.
My front brake rotors warped at ~12K miles. I had them machined and they lasted about another 12k until I replaced them with aftermarket Centric. Those lasted ~12K miles until they warped. At this time I went back to VW OEM rotors and they lasted ~12k miles. I had the OEM's machined, but now they are warped again. Along the way I tried some aftermarket pads, and generally had problems I purchased a pair at NAPA and they were sloppy in the caliper and would shift and click when applying the brakes in reverse. Went back to OEM on the pads and have no problems.
I have 4,800 miles on a 2023 MK8 and my brake pads are sticking to the rotors.
Write your review
Help others - share your experience with this part.
