Brake pads Raybestos or OEM Toyota

The OEM rotors wear very quickly. The OEM pads are Akebono semi organic which are actually pretty good. However the OEM pads create a ton of brake dust which makes the wheels look terrible. When I replaced mine about a year ago I went the aftermarket route and used Raybestos rotors and pads.

The best overall for my use are Raybestos “Truck and Medium Duty”.

My oem brake pads, (‘23 A-91MT) are getting low ish after a year of driving her and going to the track. OEM ones seem expensive but they did last a hpde 1/2 driver a year.

I'm on my second one, a '19 Prius Prime I bought new has 507k miles on it today. About to do the first brake job on it soon.

2012 Prius, 202k miles, still with original brakes.

2017 Prius Prime, 110k miles, still with original brakes.

Both inspected annually by our mechanic. Both still going strong.

based on the inputs so far, I have decided to take the Sequoia (price: around $5000, he takes care of the brake pads and rotors.

I always buy from Rockauto, but check if the part is on Amazon for comparable price for the free shipping. With brake parts especially I highly recommend buying the best you can afford. Cheap pads and rotors will be noisier and more likely to warp and give vibration when braking. The cheapest pads are also usually bonded meaning the friction material is only glued onto the backing plate, and I’ve seen them separate, especially a risk if you drive where rust is an issue. Also cheap pads don’t always include abutment clips and good shims.

I just changed my rear pads and rotors. Bought raybestos from rockauto. $80 shipped.

I replaced the pads and rotors on my Jetta this past spring. I put on Raybestos Element3 pads and coated rotors, and I've put maybe 6k-ish miles on them since then. Everything was fine for a while, but lately a squeal started to slowly develop until now it's every time I use the brakes. It sounds exactly the wear indicator noise I'm used to hearing when pads are low.

This happened to my Gen2. I gave it to some guy to change pads and these lights came out after. I think he didn't do it properly and air entered into the line. I then took it to a local Toyota dealership where they fixed it. (I don't recall what they did exactly, maybe flush and replaced the break fluid). I was fearing it was the actuator, which as other have posted, is very expensive on this Prius. I had to drive very slow and careful, because I had no power in the brakes, so they were hard and slow. No ABS. No regen either.