Brake pads R1 Concepts or TRW

Did my own with R1 Concepts E-Line pads and rotors. Bought my own parts kit seperate since they don't include them like some brands do. After 40k miles on them, I'm still going strong and will go another 20k before I evaluate their shape. I have slotted and drilled rotors, and you can visibly see the wear on the rotors, the pads are still going strong. As for stopping power I'd say it's average or OEM. No rust after 2 years on them thanks to the coating on the rotors. The surface does rust lightly after a rain storm, but they're clean after driving and braking.

Job got done in about three evenings Biggest time sinks were figuring out how to use the caliper piston compression tool and getting my overtorqued/rusted lug nuts off. Drove up from Maryland to NYC with no problems so I think I did the job right.

I did use r1concepts house brand ceramic brake pads in my most recent brake change and I like them overall. I do not track my vehicle but maybe some spirited driving here and there

I have the TRW TPC1633 ceramic pads installed, perfect fit (OEM) and brake as good as stock...actually smoother. Dust is reduced maybe by half.

TRW Ceramic pads, look identical to OEM, since TRW makes the OEM pads. Feel same as stock, way down on dust.

They were super friendly and helped me get the best brakes for my Suburban. They literally made the brakes specifically for me and I picked them up a few days later. Definitely a quality product, too.

Finally got around to getting my brakes installed. I've barely put 10 miles on the setup, and the improvement is quite noticeable. Initial bite is improved, and much less effort is required for the same braking force.

In an effort of "lets start over with the basics" we changed the front pads with new TRW OEM ones and the thing was back to normal awesome braking. This Van should stop with alacrity and ABS should kick in when you really step on the brakes.

I've been using stock pads on the GTI; TRW and Ate brands from the parts counter at my dealer. That was not a pre-planned choice but one I made after being completely surprised at the track performance of the pads. Yeah, they're soft, but they're remarkably consistent as long as I am too. They come back quickly from being overheated if I do miss a mark.

Changed the front brake disc and pads (TRW brand) on my car (Opel/Vauxhall Astra J 2016) and noticed my car started to smell heavily burnt rubber after heavy braking when the car stops. I understood that brakes does this in the beginning but now it has gone s month and probably around 150km (100miles) and I also have made some emergency brakes from high speed to speed up this process. So two weeks ago I removed everything and really deep cleaned the caliper and checked the pads. From smelling the pads it seems like it is the glue between the brake pad and the anti squeak plate that cause the smell (?) I also checked the temperature of the brake disc after normal usage and they are all around the same temperature, so I doubt it is a frozen caliper. (Around 70c 155f) but still they smell, maybe a bit less.