Brake pads Project Mu or DIXCEL

Depends what you're after. If just street with some spirited driving, smething like pmu hc+ or ns400 works. I do track work and used to run hc800s, but got hc+ thinking they are the same. Only 600c rated instead. But, good cold performance, and extra good performance hot. So, they don't wear out super quickly while daily driving. Got quite a lot of track days and driving out of my original hc800s with t3 rotors. But, they are harder to find. Need to get the shape from pmus website, and then find somebody that stocks them. Rhd japan may do

I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

personally i run dixcel z-type pads and a stock rotor with DOT4 fluid and its one of the best upgrade options IMO

These are the best double duty brake pad I have tested so far. I have tried stoptech 309 and EBC blue ndx which will start to fade around 4-5 laps at my local track. The dixcel pads I can not get them to fade at all. Pad life seems okay with mix use but street manners are abit worst than the stoptech and EBC (sometimes squeals and dust alot).

For brakes, you're limited to whatever you can fit with your wheels.. I doubt you'd fit Brembo's with them, so you may be limited to 4pot/2pot or just rebuilding your current calipers with good street pads and rotors.

On my WRX, I use Dixcel ES pads front and rear

Upgraded rotors (paragon 2 piece) and dixcel type z pads.

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.

PMU HC800+ was my dual duty pad and was a solid compromise. But end of the day it’s just that - a compromise