Brake pads OEM Volvo or OEM Mazda

OEM Mazda Brake pads

My 12 of this generation is at 222k miles with just oil changes and tires as well. One set of pads and rotors at 175k and still had life left.

Pros: reliable and lowest maintenance
Vehicle: Mazda 2
Mileage: 357271 km
Comment
Is this review helpful?
source
OEM Volvo Brake pads

For my 2016 V60 I only spend about $500. Also depending on your rotors and pads, there's no need to do both front and rear together.

Pros: inexpensive repair
Vehicle: Volvo V60
Comment
Is this review helpful?
source
OEM Volvo Brake pads

I replaced the front pads myself after 25,000 miles (was 2 years ago), it cost me under $200, including all the necessary tools and original Volvo pads.

Pros: inexpensive, easy installation
Mileage: 25000 km
Comment
Is this review helpful?
source
OEM Volvo Brake pads

They let me use multiple coupons at once (all expired and all say that you can only do 1 discount).

For the account info:

The service tech checked my account and confirmed that only my contact information is on my account and printed it out for me. Then the other tech asked if he checked the scheduler? And they found the ex's contact information on the scheduler. He updated the information on the scheduler and then they both logged in on different computers to check, including scheduling an appointment for me to confirm that only my contact info is on there. Then the other tech checked again and confirmed that it was correct on his computer.

Pros: excellent service
Cons: multiple coupons issue
Vehicle: Volvo XC60
Comment
Is this review helpful?
source
OEM Mazda Brake pads

Had the same scenario with my cx30 after changing the brakes, only the car messages were things such as engine malfunction and dynamic control malfunction which is ridiculous. Clearing the fault using a Bluetooth obd and the torque app was enough for me, thanks for the post.

Pros: easy fault clearing
Cons: engine malfunction, dynamic control malfunction
Vehicle: Mazda
Comment
Is this review helpful?
source
OEM Mazda Brake pads

Changed the pads front and rear was super easy and straight forward.Then after taking the car out of 'electric brake service mode' and starting the car I get the a yellow check engine light and code C05AB, clearing it made no difference. Only thing I could find online was "The electronically controlled brake unit detects that the pressure feed valve (primary side) is stuck ON (OPEN)."

Pros: easy installation, straightforward
Cons: check engine light, code C05AB
Vehicle: Mazda 3
Comment
Is this review helpful?
source
OEM Mazda Brake pads
TheSaSQuatCh
  • Braking:
  • Noise:
Rating 1.0

I put OEM Brakes on my ‘19 3 GT AWD. I’m 20K KM into them, and they pulse like mad when I brake above 90KM/h. Absolute fucking trash. The factory brakes also did this, above 90KM, but started around 50K into their life.

Cons: pulsating brakes, poor quality
Vehicle: Mazda 3
Mileage: 20000 km
Comment
Is this review helpful?
source
1 2 3 4 5 6 7 8 9

Write your review

Help others - share your experience with this part.

Other comparisons
Loading...