Brake pads OEM Toyota or Duralast

I’ve always run Dynamic Friction or Centric myself. I have no complaints from either brand, both preform well, quiet, seem to last (which will obviously vary by how much you’re driving/stopping), and they get the job done.

I've had my 2013, 89,000 miles, which isn't *that* old but still, and have had zero mechanical problems. Only maintenance and expected repairs like brake pads or air filters.

I had warp issues with my 2010 Sport MT until I bought these pads and rotors from AutoZone: Duralast Elite pads DE1394 and Duralast Gold rotor 3295DG. This was two years ago and parts were $160 and labor was $80/hour (cheap around here...Philly) for a total around $300.

I'm only now replacing the pads & rotors *for the first time* during my ownership. The rotors won't pass inspection, but I'm shocked to find that the pads still have 7/32"-8/32" left. As it turns out, I've been running Duralast Gold rotors & Duralast Elite pads the entire time.

That's a phenomenal track record for the amount of "spirited" road I put past this car.

Toyota hybrids have no starter, no belts, no alternator to wear out and the brake pads and disks last around 100,000 miles due to little use

I put Duralast gold's on all my vehicles. Got a good warranty and come with all clips and brake grease you need. They're ceramic also, so quieter and more smooth braking and significantly less brake dust. Last quite awhile (1-2 years) as long as your not heavy braking all the time. And they're not too expensive either, moderately priced. Plus a bonus, they're black and match my paint.

Autozone's Duralast Gold pads and rotors will run you about $300 for the set. They work very nicely. If you're even moderately handy or have a friend with the tools, it's less than 2 hours of work. If you have a decent setup with a lift, it's more like 45 minutes of work. $600 for labor is HIGH AF. This truck is the easiest brake job I've ever done.

I just had my sister-in-law's 2008 Highlander in my garage on Sunday after she professed that at 150k miles that the brakes were finally making some noise. I ordered a round of rotors and pads and intended to spend a few hours replacing the brakes and the blower motor for the front, as it has been a bit inconsistent in operation. I put the Highlander up on jackstands and pulled the wheels off, and the brakes looked like they had about 10k miles on them.. I was just stunned. I ended up just putting some brake squeal compound on the back of the pads and sent her on her way. They are truly robust and under-rated vehicles.

I've bought brake pads, brake calipers and rotors from Duralast (Autozone). Not one problem with them. I'd do it again in heartbeat.

Oriellys generally carries good discount auto parts like wix, wearever brake pads. Buy duralast break pads and watch a hour and half job turn into a all day cussathon. One time before I knew better I forced a set on thinking "well that's how they came must be oem fit" they jammed and warped the rotor in 2 months. Replaced them again dads watching me struggle and cussing the world going for a hammer. Dad " WTH do you need a hammer for? Let me see them. He inspected them and came to the conclusion they were sloppily made. The slide ears were chunky globs of material that were slightly oversized and rounded instead of being straight contact surfaces. Only after carefully taking a dremel to them did they fit correctly.