Brake pads OEM Subaru or Project Mu

Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.

I went in for a 30k service (2021 Ascent) and mentioned the brake judder and warranty extension. They confirmed and ordered the parts (pads and rotors), awaiting parts now but it seems it will be all be covered.

Watched some YouTube, bought OEM parks off rock auto, did it in 40 mins for $300. Those bitches survived many track days for another 30,000 miles till I sold the car.

Anyways, its a good working solid car that needed tires and rotors/pads that i've already done.

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.

I did Project MU B force pads. DBA 4000 rotors, Stop tech stainless steel brake lines, Motul 660 brake fluid, radium brake booster brace(a must). Make sure to set those pads in the correct sequence and they gonna rip your face off bud! I had 6 piston brembos also, what a difference!

PMU HC800+ was my dual duty pad and was a solid compromise. But end of the day it’s just that - a compromise

They are the worst deal. They charge like what $93 now for an oil change? I can get a case of 12 quarts for like $24. And do it my self. I can’t even remember what they tried to quote me for a brake job. I got brakes and rotors for under $200.

I have an old groupe A Subaru homologation car. It’s on its 6th engine which is also currently blown. There are NO MORE ENGINES. NONE. ZERO. NADA. NOTHING. So now I have to buy a crashed wrx and swap the whole drivetrain over if I want the car to move under its own power. My frs just……… I mean…… 250 in brake pads and fluid, and 500 bucks in tires. Oh and a 90$ oil change before and after.