Brake pads OEM FORD or Hawk Performance

i run HP+ for track days, will be doing my 4th on them in a few weeks. they are plenty for my level of driving. i take them off after my track day because they are loud and filthy. but for on-track, they are perfect.

I have dtc-60 on mine. They’re great track pads, but overkill for your first track day. They’re comically squeaky if you use them around town and def not made for that.

I run the 60s in the front and stock in the rear. The 60s are a lot of braking power specially for your first time. I would not recommend the 70s that will be way too much. They are dusty but I'm at about 50% life on 5 track weekends. One weekend the car almost never shut off. If you are really using them make sure to give them a cool down lap or they will smoke.

I have the dtc60 with rbf600 fluid. No fade at all. Would recommend. If you're tracking only once a year though, make sure to swap back to street pads. The hawks dust a ton and squeal veeery loud.

Been on Hawk HPS 5.0 for over a year now. Good feeling pad.

I went with hps 5.0s and they’re great but I should’ve gone less aggressive

Hawk HPS 5.0 front and rear.

They dust the same as what came on my car from the factory, the first 1k miles they felt like they needed some extra heat in them to get a "normal" feel but by the time I left my neighborhood it was fine. Either I'm used to it now or it went away.

Is it a reasonable price? No not really. Can you just do it at home in the driveway? If you have a driveway, and it's nice if you have someone around who's done it before who can remind you to do things like properly torque the bolts instead of just "by feel" if you're new to this, or add a little anti-seize on the hub so you can get it off in 5 years, without giving you silly quirky advice like a lot of YouTubers like to do to try and make themselves slightly different. What _should_ you do? My suggestion is call a few local shops (even Ford dealerships if you want). Tell them you've got some rotors and pads (order some standard ones off of Rock Auto) and ask what they would charge to install it. Call 5 places, ignore the most and least expensive ones, and if the remainders pick the one you like the look of (check online reviews, see how long they've been in business, etc). Every mechanic has been changing brakes since they were 12, but you want one who looks like they care about their work. A good mechanic with a 2 post lift should be able to do a Mustang brake job in like 20 minutes if they tried to. They'll actually take about an hour and be careful about it. They'll charge you some "standard" hours regardless of clock time because they need to pay for their shop etc. It's cheaper to do it yourself, but not everyone _wants_ to do it themselves, or trusts themselves to learn something from YouTube videos that their life depends on every day.

I swapped to Hawk HP+ as a hybrid but ultimately I hated them on both street and track. They worked fine though.

I changed out the oem and ran Hawks for a while, braking distance wan't much difference but the brake dust was terrible, Rims where dirty all of the time.