Brake pads Hella Pagid or R1 Concepts

Pagid is decent, I used them on my Cayman and it's survived 20 Laps of the Nurburgring and a track day.

I fitted a Pagid discs and pads (fronts and rears) to my Octavia vRS a couple of months back and don't notice any difference from the previous OEM. Paid £230 just for the parts.

I havent had an issue with them in 2 years.

I used the R1 concepts drilled and slotted kit with pads. Front and rear total was like 500 bucks. Did it myself. They work great.

I'm running the cheapest coated rotors from rockauto and Pagid "OE" pads and I'm happy with it.

They seem good so far. I'm not very handy and I was able to put them on pretty easily.

I use Pagid RSL29s on my M3, I don't bother switching pads after events. They work great on the street but I'm in Texas so it rarely gets below 45 degrees here. They squeal but the dust isn't too bad. I don't daily it but I wouldn't have an issue if I did. The squeal is annoying but really not too bothersome to me even though I drive 95% of the time with my windows down.

I've had mine for like 60k miles. 87k ish on the clock. Just changed everything. Yearly inspection and the shop rejected it for brakes. Brake installer said the weren't that bad. I bought an R1 Concepts kit. Front and rear rotors plus pads all around. $220 shipped on Walmart+ (also found on Amazon or Rock Auto). The shop had a brakes special: $160 installed for new pads. Since I had the parts and rotors take like 30 seconds to swap out, they charged me for two brake installs at $150 each. So all in installed was like $550 after taxes.For reference: the shop that rejected it quoted something like $500 for the front and $500 for the rear. And I don't think it was all new everything.

You'll need decent pads, and ones that can handle a car with a bit of weight behind it, think Pagid RSL29, Winmax W5 or Mintex 1166 if you're not going mad. You'll want to flush out your brake fluid and replace it with something that will take the heat as the tiny brakes on a 325i WILL overheat, its not a matter of if, its a matter of when, good fluid will stop you from boiling it and crashing!

Rockauto carries Dynamic Friction kits. People will say "Rockauto is cheap shit" and then recommend R1 Concepts. But Dynamic Friction OWNS R1 Concepts and all of their pads and rotors are the same. Only difference is R1 does drilled and slotting while Dynamic are just blank rotors. So you really don't have to spend the extra money on R1 stuff. Also, you don't need slotted rotors for everyday driving. Heck, even some track guys still use blanks just fine. Only thing to worry about for track is pads, which I wouldn't recommend any of the R1 stuff for. Had one of their pads claiming both track and street but their pad material on one of their pads completely disintegrated on track.