Brake pads Hella Pagid or Mintex

I currently have all four corners replaced with Hella Pagid on a 2018 Golf. I’ve had them on for 2.5 years and 60,000km. Love them just as good as OEM and I believe there are also a OEM supplier to VW depending where they’re sold.

Adam's front and rear ventilated rotors. Mintex front and rear brake pads. Motul DOT 5.1 Synthetic brake fluid. Goodridge G - Stop stainless steel braided brake lines.

Pagid is decent, I used them on my Cayman and it's survived 20 Laps of the Nurburgring and a track day.

I fitted a Pagid discs and pads (fronts and rears) to my Octavia vRS a couple of months back and don't notice any difference from the previous OEM. Paid £230 just for the parts.

I'm running the cheapest coated rotors from rockauto and Pagid "OE" pads and I'm happy with it.

I use Pagid RSL29s on my M3, I don't bother switching pads after events. They work great on the street but I'm in Texas so it rarely gets below 45 degrees here. They squeal but the dust isn't too bad. I don't daily it but I wouldn't have an issue if I did. The squeal is annoying but really not too bothersome to me even though I drive 95% of the time with my windows down.

You will need brake cooling/ducts or will need to remove the dust shield to get more airflow (or both), went through a brand new set of rear Pagid RS29 endurance pads in less than a weekend in July when I first got the first F80 years ago. The heat did a number on them in the afternoons with ambient temps over 90 and all the 150ish to 40ish and 130ish to 30ish on the back and front straights respectively

You'll need decent pads, and ones that can handle a car with a bit of weight behind it, think Pagid RSL29, Winmax W5 or Mintex 1166 if you're not going mad. You'll want to flush out your brake fluid and replace it with something that will take the heat as the tiny brakes on a 325i WILL overheat, its not a matter of if, its a matter of when, good fluid will stop you from boiling it and crashing!

when i bought my girling 60 setup the seller threw in a set of mintex red box pads.....i hate them. i was never impressed with the red box's in other cars but on my setup they squealed like crazy when i was off the brakes. i too had the issue with the pads overhanging into the center of the rotor but i took a rolox disc on a die grinder and took a little off the inner portion of the pads. even after doing that they still squeal. plus theyre a real dirty pad and after about 10k miles i only have about 50% pad life left.

those are worse then stock.