Brake pads Ferodo or STOPTECH

If you have 312 mm front rotors I'd suggest to upgrade to FER-FCP4433G

DS3.12 pads https://www.brakes-shop.com/fer-fcp4433g-ferodo-ds3-12-brake-pads-front.html and Motul 600 / 660 brake fluid (or Castrol React SRF).

With this setup you will be limited by your tyres and suspension.

Don't buy DBA rotors and pads or EBC pads. You will destroy them (like crack in pieces).

Don't run with OEM fluid or pads \u2014 you will definitely lose stopping power relatively early on.

Stoptech 309 and Endless MX72/CCRG pads. They were great for my beginner's pace on the track. Obviously once I started pushing it more, you'll find the limits of the pad.

Back in May I swapped OEM pads for Ferodo DS2500 for my first track day in my GR86. Otherwise the car is bone stock. I noticed some slight pulsing of the steering wheel but only during hard braking (100 to 30mph). No brake fade that I noticed.

DS2500’s were the best hybrid pads I’ve used. But I only did 1-2 a year.

Gt4 brake pads ran me about 1000-1100 for ferodo ds3.12.

Ferrodo DS2500 is probably the best dual duty pad.

I run StopTech Sport pads on my street M3 for the days I want to give demo laps to my students on days I'm instructing and don't want to do deal with the track car. They work totally fine for both.

I daily and autox ferodo ds2500, pretty happy with them, more dust and noise than an oem pad but can withstand light track work. Doesn’t sound like an awful bus/train but the occasional squeak happens.

The 3.12s have a LOT of bite and can make modulation tough on certain cars. On my E46 M3, I run DS UNO or DS1.11s. That's with the AP race kit front & rear. Didn't like the 3.12s for that application.

I purchased Ferodo DS2500 pads for autocross with the Brembos when my stock pads were shot. Lubed them up using CRC brake grease and even bought separate Girodisco backing plates to help with noise. It was absolutely terrible. Loud squealing all the time from 15mph to zero. Down hills, in traffic, or coming to a stop.