We recently made this to our caddy Mk1, all home made with help from friends with some skills, total cost, honeslty I dont have any idea haha: Engine is from a 2008 R32 Drivetrain from a 2004 R32 (6-speed manual, also have The DGS setup) Haldex is manually operated so is not and will not workas on the R32, you can drive front wheel drive or 4wheel drive (pushing a button). ECU and engine harness is from an R32 so it works as it should. Front suspension, hubs, etc were upgraded to acommodate Mk3/Scirocco 16v Discs (my dad did some crazy stuff in there but it brakes awesome)
I have negotiated with SWMBO that for slightly more than what we would pay to have the dealer do just the rears I could put new slotted rotors (do not want drilled, slotted only), new Fedora DS2500 pads (have them on the FRS and love them) and coated stainless steel brake lines on all four corners and do the labor myself.
When I replaced the brakes on my 2016 Performance Package GTI, I took my local shop's recommendations on an "upgraded" pad for the fronts. The next month, I experienced so much squeaking when I applied the brakes that I went back to the shop and asked them to put stock pads back on. I've been happy every since. I would recommend stock pads from VW.
I use the Ferodo DS2500. I track my car several times a year, but it’s also a daily driver in New England winters.Been very impressed with these pads as they are absolutely silent and still bite in the cold. The only noise they make is a clunk when changing direction front to back (like reversing, then going forward again).Dust isn’t any worse than OEM, may possibly be better actually.If you don’t really care about better performance, find a ceramic pad like PosiQuiet.
A brand new Camaro 1SS 1LE will be $45k. It's the best performance bang for buck on the market and comes pretty much built for track days- it has an extra oil cooler, transmission fluid cooler, great brakes with good street/track pads (they're basically the same as Ferrodo DS2500), and the alpha platform has unbelievable potential. The motor is easy to deal with since it's NA (linear power curve, still makes great tq at lower RPMs) and the eLSD+traction control tuning is extremely competent. I beat the absolute shit out of mine on track 1-2 times a month and it never skips a beat even in the disgusting Florida summer heat.
Stock calipers with ferodo ds11.1 pads
its just the pad compound VW is using because everyone get emotional about excessive brake dust..
SOLVED - I simply overheated the pads. Spoke to Ferodo and I followed their advice: Bed in was fine. Overheating led to pad material bake to the rotors. 120 grit block sanding on the rotors removed this. Pads were a little glazed but 80 grit sanding removed the shiny bits. Bed in again and running well but haven’t pushed it yet so unsure if the pads are done.
Bad pads from VW don't ever use OEM pads on Arteon!
The front brakes have suddenly started vibrating under a heavy load on my Alltrack. The dealer replaced all rotors and pads just before I bought the car. the new brakes have about 6k miles on them.
Write your review
Help others - share your experience with this part.
