Brake pads Ferodo or Duralast

I’ve always put Duralast Gold pads and rotors on my vehicle. I’ve got no complaints and they have a lifetime warranty.

A few weeks ago I replaced the front pads and rotors on my ‘21 grand touring. I got Duralast Gold rotors and Duralast Elite brake pads from Autozone. An independent repair shop installed them. They are working fine. I decided to purchase from Autozone for the warranty, which is lifetime on the pads and 3 years on the rotors.

Ferodo DS2500 are a great compromise pad. They’re a bit more on the race side of things but I never had issues with them being sketchy. Just get a bit of heat into them early to make sure they’re there.

I'm going to tell you ferodo DS 1.11. Street driven on them a ton very easy on rotors. Endurance pad, much better than other things I see mentioned a lot like it blows my mind when people think RSL29s are better. I don't have an M3 but I have a 330ci which has the same brakes, and I've had lots of other cars from Corvettes to Mustangs and camaros. Have run that compound a ton.

I think they work just fine. They squealed a bit even after running them in, it stopped however after the first track day where i properly cooked the brakes.

If you want a bit more performance without loosing cold braking, use ferodo ds performance, they're amazing price-quality wise.

I had the same problem. Just ordered ceramic pads from auto zone and swapped them out. Car is smooth and quiet now. I can’t stress enough the difference it makes for anyone dealing with the noisy rough brakes.

I switched to the Ferodo DSUno. I am satisfied with its performance, but they seem to struggle because of something. Today, after the track day on Saturday, I checked it and found a crack and a gnawed edge. Also, they have uneven wear, about 0.5-1mm difference. The differences are between the top and bottom parts of the pads, front and back parts and on different sides of the same rotor (inner and outer pads). Uneven wear was with the old pads as well. Recently, I installed brake air ducts, and after going out from the track, the temperature was, in the worst case, 480C degree, which looks fine for these pads. In total, I drove for about 3 hours on tracks, one on a wet track (so no hard braking) and two moderately/hard(8-9/10) braking. The brake rotors are also new, Zimmermann blank, installed with pads. The initial thickness of the pads is 16.4mm (with the plate, the plate is 5.5mm, so the "pure" pad is about 11mm) Currently, I have eaten about 4.5-5mm of the pads in 3 hours of tracking.

Replaced the rears with Duralast Elites today. They are a bit louder (you can hear the pad dragging on the rotor inside the car). Maybe they will not be as loud as they break in.

Same issue here. I replaced the pads twice with the same brand (Duralast Gold), and the issue is still apparent. It appears to be an issue only with the 340mm brakes for Golf Rs and Tiguans.