Brake pads Ferodo or DBA

I did tons of research and settled on Ferodo DS3.12 (FCP4425G) in front and DS1.11 (FCP4697W) rear with Castrol SRF fluid. Stock R calipers and rotors have held up as well as any aftermarkets I read about for MUCH less $. Zero issues, and cheap.

I've had good results with Ferodo DS2500 pads. More torque than stock, dusting about the same.

I love the Ferodo DS 1.11 that I use on my M4. They're noisy and the dust is epic but they're totally fine to drive to and from the track. I've used them at a few track days at California Speedway, they're wearing really well, and I've never had even the slightest fade.

For \~$250, the Ferodo DS2500's are a great pad for dual street/spirited and light/medium track use.With any semi-metallic pad, you're going to have dust. You can't really substantially reduce dusting without going to something like ceramic pads, which then frictional force is compromised.

The heat resistance is much better than the stock pads, so it'd take a lot more to make these pads fade. They are more durable as well at least according to my experience. The only issues are that when it's cold the pads do get a little noisy and there's the increased brake dust, but I think these are non major issues and worthy of the trade off for much better and reliable braking performance.

I used my stock tires 15k mi + 6 track days + 2 driver skill courses - brake fluid (Motul RBF600) - brake pads (I used Ferodo DS2500 on the fronts)

Cut to 2019 and I added Ferodo Racing 2500 pads to the front and they worked GREAT at NJMSP, still with the EBC rears.

Ferodo DS2500 (street/track)-$290.00

I think my DS2500s were a good bit dustier than stock

Dba xp pads with dba t3 rotors, but wouldn't use them again they dust like hell